[Starkit] Tclkit 8.5a4 + registry

[Martin Lemburg]

Hi Larry,

In the "plain" ActiveTcl tclsh the registry command is not present after
startup.
In the "plain" ActiveTcl wish the registry command is already present, which
may depend on tkCon or other startup packages needing the registry command.

In the tclkit 8.5a4 and in the tclkitsh 8.5a4 the registry command is also
not present after startup.

But I had recently this "package require ..." error, even with the package
dde.

Currently (right after startup) it is no problem to require the packages
registry (1.1.5) and dde (1.3.1).

Best regards,

Martin Lemburg

> -----Original Message-----
> From: starkit-bounces at equi4.com
> [mailto:starkit-bounces at equi4.com] On Behalf Of Virden, Larry W.
> Sent: Wednesday, February 07, 2007 5:38 PM
> To: starkit at equi4.com
> Subject: RE: [Starkit] Tclkit 8.5a4 + registry
>
> I suspect that the previous poster took a look inside a
> normal tclsh. At least, when I do that, using the activetcl
> tclsh and wish, I find that the registry command is available
> in tclsh without having done a package require. In wish, it
> looks a sif all the packages have been at least scanned by
> the time the console is created.
>
> --
> <URL: http://wiki.tcl.tk/ >
> Even if explicitly stated to the contrary, nothing in this
> posting should be construed as representing my employer's opinions.
> <URL: mailto:lvirden at gmail.com > <URL:
> http://www.purl.org/NET/lvirden/ >
>
>
>
> -----Original Message-----
> From: starkit-bounces at equi4.com
> [mailto:starkit-bounces at equi4.com] On Behalf Of Lemburg, Martin
> Sent: Wednesday, February 07, 2007 11:25 AM
> To: starkit at equi4.com
> Subject: RE: [Starkit] Tclkit 8.5a4 + registry
>
>
> Hello Uwe,
>
> Sorry to ask, but ... are you sure, that the registry command
> is existent without requiring the registry package?
>
> I tried with my tclkit 8.5a4 and the tclkitsh 8.5a4, but none
> of them provides a registry command from startup?
>
> Best regards,
>
> Martin Lemburg
>
> > -----Original Message-----
> > From: starkit-bounces at equi4.com
> [mailto:starkit-bounces at equi4.com] On
> > Behalf Of Uwe Koloska
> > Sent: Wednesday, February 07, 2007 5:12 PM
> > To: starkit at equi4.com
> > Subject: Re: [Starkit] Tclkit 8.5a4 + registry
> >
> > Am Mittwoch, 25. Oktober 2006 10:17 schrieb Marcel Broeken:
> > > Hi,
> > >
> > > It looks like Tclkit 8.5a4 for Windows (with GUI and
> without,UPX and
> > > normal) has problems loading the registry package. Older
> > version like
> > > 8.5a2 or 8.4.13 work just fine.
> > > An example:
> > > () 4 % info patchlevel
> > > 8.5a4
> > > () 5 % package require registry
> > > attempt to provide package registry 1.1.5 failed: no version of
> > > package registry provided
> >
> > I have noticed the same problem, cause I use twapi that
> wants to use
> > the registry package.
> >
> > But what is the purpose of 'package require registry' anyway?  Even
> > without this command, the registry command is available.  Is there
> > more after a 'package require' or is it just some sugar?
> >
> > Uwe Koloska
> >
> > --
> > Dipl.-Ing. Uwe Koloska
> >
> > voice INTER connect GmbH           Tel +351 481 088 3
> > Ammonstraße 35                     Fax +351 438 399 25
> > 01067 Dresden - Germany            www.voiceinterconnect.de
> > _____________________________________________
> > Starkit mailing list  -  Starkit at equi4.com
> > http://www.equi4.com/mailman/listinfo/starkit
> >
>
>
> _____________________________________________
> Starkit mailing list  -  Starkit at equi4.com
> http://www.equi4.com/mailman/listinfo/starkit
> _____________________________________________
> Starkit mailing list  -  Starkit at equi4.com
> http://www.equi4.com/mailman/listinfo/starkit
>